🤖 Ai回答: It seems like you're trying to use a command related to IP addresses, but `ip a s` isn't a standard command. Here's what you might be looking for:
### 1. Show IP Addresses
To display all network interfaces and their IP addresses, use:
```bash
ip addr show
```
Or the shorthand:
```bash
ip a
```
### 2. Show Detailed Statistics
If you want statistics (e.g., bytes transmitted/received), use:
```bash
ip -s addr show
```
### Example Output:
```bash
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:1a:7d:da:7c:4f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global dynamic eth0
valid_lft 86399sec preferred_lft 86399sec
inet6 fe80::21a:7dff:fedd:7c4f/64 scope link
valid_lft forever preferred_lft forever
```